Insignia NS-39DR510CA17 User Manual page 49

8 If you connected your TV to the Internet, you have the option of setting up Live TV Pause.
page 52 explains how to set up and use this feature. If you don't want to set up Live TV Pause, or if this option is not
available to you, select Done to start watching Live TV.
Scanning for channels can take several minutes.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You'll have to repeat the channel scan if you remove the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels > Start finding
channels. Your antenna reception and picture quality depend on the position of
your antenna and on your location relative to the antennas of broadcasters in your
area.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press the UP and DOWN arrows to change channels.
• Press the LEFT arrow to display the channel list and then use the UP and DOWN arrows to select a channel to watch.
Or press REWIND or FAST FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Note
If is not available on your remote control, you can use
Jump Back button on a universal remote. For more information, see
page 79.
Remote control
buttons while watching TV.
on page 17 has more information on using the remote control
www.insigniaproducts.com
39" 1080p, 60Hz, LED Roku TV
Pausing Live TV
on the Roku App or the
Other devices on
on
49