Uniden Guardian G7404D1 Owner's Manual page 14

1. From the menu shortcut screen, select Main Menu/
Setup/Alarm/Motion. The Motion screen displays.
2. Set each camera's motion detection specifications.
• Select Camera. Select the channel you want to record when motion is detected.
• Set Holding Time. Set how long the camera continues recording after motion is no longer
detected.
• Set Trigger. Other channels record when one of the cameras detects motion. The Trigger
field sets how that camera notifies that it is recording (buzzer, email notification, etc).
3. The last field, Area, masks parts of the viewing area from
being triggered by normal motion. Select Setting, and
a grid displays over the camers's live view. Use the left
mouse to select a grid to block from view. Left-click and
drag to select multiple boxes. Left-click those boxes
again to de-select them. Mask off flags, trees, or other
objects that move in the wind to avoid false alerts.
4. Right-click to display the control bar. Click the STAR icon (
range a sensitivity area. Click the the TRASH CAN icon (
Click the SD CARD icon (
5. From Live view, test motion detection by moving something or having someone walk through
the camera's view. If the DVR detects movement within the active grid area, a red person icon
displays.
14
) to save the settings and click
) to make the whole viewing
) to remove sensitivity areas.
to exit.