Table of Contents
Advertisement
Notice: To guarantee proper and consistent operation, it is important to follow the
guidelines in this manual. Our company will not accept responsibility for damages
resulting from the misuse of this fixture due to the disregard of the information
printed in this manual.
●1. In order to ensure the light could operate normally, the ambient temperature
couldn't be higher than 40℃ and no lower than-10℃.
●2. Under normal condition, the highest sectional surface temperature may be up to
60 ℃.
●3.These projectors are designed depends on the electric shock protection, the
projector should be connected with the power supply system which connected
ground enough. The projector's ground cable should be connected with the ground
cable of the power supply system as well. The ground mark of the light metal cover
should be connecting with the installation bricked steadily.
●4. Don't use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person to change
the damaged power cable in order to avoid any dangerous.
●5.Please check the voltage, frequency data of power supply system is suitable for the
mentioned on the projector. Please do avoid the different voltage between them
and burn the projector.
●6.Do not attempt to operate this fixture if the power cord has become damaged or
frayed.
●7.Never open this fixture while in use.
●8.Never look directly into the light source. You risk injury to your retina, which may
induce blindness.
●9.Please be aware that damages caused by modifications to the device are not subject
to warranty.
SAFETY INSTRUCTIONS
2
Advertisement
Table of Contents
