Table of Contents
Advertisement
■This lighting fixture is for professional use only - it is not for household use.
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be prgperly hooked onto the fitting and secured to the framework.
When suspending the fixture, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all the devices they support.
。
■Mounting surface and fire protection
Please do not install the fixture onto combustible surface.
Keep all combustible materials at least 20 cm away from the fixture.
Ensure a minimum clearance of 0.2m around the cooling fans and ventilation.
Do not expose the front glass to sunlight or other strong light source from any angle.
Lenses can focus the sun's rays inside the fixture, creating a potential fire hazard.
t
40℃
a
The fixture is intended for indoor application.
The double insulation between the LV power supply and the control conductor on the fixture.
SAFETY INFORMATION
2
40
Advertisement
Table of Contents
