Shutting Off The Picture Temporarily; Projector Security Features - Epson Pro Cinema LS12000 User Manual

Parent topic:
Related references
Input Signal Settings - Signal I/O Menu

Shutting Off the Picture Temporarily

You can temporarily turn off the projected picture if you want to redirect your audience's attention during
a presentation. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.
1. Press the Blank button on the remote control to temporarily stop projection.
2. To turn the picture back on, press the Blank button again.
Parent topic:

Projector Security Features

You can secure your projector to deter theft or prevent unintended use by setting up the following
security features:
• Lens lock to prevent changing the zoom, focus, or lens shift settings.
• Button lock security to block operation of the projector using the buttons on the control panel.
• Security cabling to physically cable the projector in place.
Locking the Projector's Lens Settings and Buttons
Installing a Security Cable
Parent topic:
Adjusting Projector Features
Adjusting Projector Features
Adjusting Projector Features
76