Mounting The Printer Pp-510 - Furuno RC-1800F2 Installation Manual

3. Unfasten two hex. bolts (M6) to open the front panel of the rack console.
Note: Lock the stay at the left-hand side inside the rack console.
Stay
4. Connect the keyboard connector to the rear of the IC-215/IB-583.
5. Remount the front panel and the front cover.
6. Fix the keyboard to the tabletop with fastener (3) and fastener (4), supplied with the installa-
tion materials CP16-02302.
1.4

Mounting the Printer PP-510

1. Place the printers on the top of the rack console. Connect printer connector and printer power
cord to printers.
2. Set printer fixing plates (one each for left and right sides of printer) to printer and fix them to
the rack console with M4x10 screws.
Screw
M4x10,
4 pcs.
PP-510
(For Inmarsat-C)
1-6
LOCK
Rack console, opening the front panel
Printer Fixing Plate (1)
FP05-06314/06304
Printer Fixing
Plate (2)
24 VDC
Printer Fixing Plate (1)
Screw M4x10,
4 pcs.
Printer Fixing Plate (2)
FP05-06315/06305
PP-510
(For DSC/NBDP or
No.2 Inmarsat-C)
24 VDC