Terminal Wiring - Furuno RC-1800F2 Installation Manual

2.2

Terminal Wiring

WAGO connectors have three cable holes respectively. You can use any hole to connect the ca-
ble. To use the WAGO connector, see the figure shown below.
WAGO connector
Locations of terminals
2-2
1 2 3 4 5
Twist the conductor.
TB101
TB102
TB103
1) Insert the slot-head driver,
and press it upward.
2) Insert the wire to hole.
3) Remove the driver.
4) Pull the wire to confirm that it is secure.
TB104
TB105