1. Apply a crosshatch pattern
2. Normalize the picture settings.
PROCEDURE
1. Enter service mode, select "SIDE" and adjust so that lines at right
and left are vertical like solid line.
14.5.6.
Vertical linearity(V-C), V-Size and V-Position adjustment
PREPARATION
1. Apply a crosshatch pattern
2. Normalize the picture settings.
PROCEDURE
1. Enter service mode, select DAC adjustment / "VRAS" and adjust
monoscope pattern to the center vertical position of the CRT
center mark.
2. Apply a monoscope pattern.
3. Confirm that center horizontal line is in center mark on CRT.
4. Adjust "VEAMP" register to correct vertical size.
Vertical centering adjustment.
42