1. Adjust "H WID" DATA so that left width and right become in good
balance (not too wide or narrow).
14.5.3.
Trapezoid adjustment
PREPARATION
1. Apply a crosshatch pattern
2. Normalize the picture settings.
PROCEDURE
1. Enter service mode, select "TRAP" and adjust DATA so that lines
at right and left are vertical like a solid line
14.5.4.
Parallelogram adjustment
PREPARATION
1. Apply a crosshatch pattern
2. Normalize the picture settings.
PROCEDURE
1. Enter service mode, select "PARA" and adjust so that the lines at
right and left are vertical like solid line.
14.5.5.
E-W PCC balance adjustment
PREPARATION
41