To Adjust Program Schedules - Honeywell Home T4 Pro Series Manual

To adjust program schedules

1 Press Menu on your thermostat.
PROG is displayed. Press Select. Then ON
2
is displayed. (If you do not want to use a
schedule, press
Press Select.) Press Select.
3 Press or
edit. Press Select.
4 Press or
edit (Wake, Away, Home, and Sleep). Press
Select.
ON is displayed. Press Select to keep the
5
schedule period on. Or press
6 Time starts blinking. Press
Press Select.
7 Temperature starts blinking. Press
temperature. Press Select. Press
setpoint. Press Select.
8 Repeat steps 4 through 7 for the remaining schedule periods.
Press Home when you're finished to save and return to the home screen.
9
10 Schedule can be adjusted and turned ON or OFF by returning to Menu and
following the steps provided above.
Program schedule override (temporary)
1 Press or
2 Once at the desired setpoint temperature,
no further action is needed. The new
setpoint temperature will be held until the
next scheduled time period begins. For more
information on schedule time periods, see
"Program Schedule" on page 3.
3 To cancel the Temporary Hold, Press
and then press Cancel.
Program schedule override (permanent)
1 Press or to adjust the temperature.
2 TEMPORARY HOLD is displayed and
the setpoint temperature flashes. While
it's flashing, press Hold (Mode) button to
change to Permanent Hold.
3 To cancel the Permanent Hold, press
and then press Cancel.
to display OFF.
or
to select day or set of days to
to select a schedule period to
to adjust the temperature.
and then Select to turn off the schedule period.
or to adjust the schedule period start time.
or to adjust the "Heat" setpoint
or to adjust the "Cool" temperature
or
or
9
MCR36519A
MCR36524A
MCR36525A