Backlight
This function allows adjusting the backlighting
intensity.
From the Interactive Menu, use buttons (1) and
●
(2) to select the item "Setting menu" and press
ENTER (3).
Select the "Display setup" item and press
●
ENTER (3).
Select the "Brightness" item and press ENTER
●
(3).
The levels from 100% to 20% are displayed.
The bottom of the screen shows the level currently
set.
The brightness is automatically adjusted according
to the ambient light detected by the instrument
panel. The backlighting intensity adjustment is
calculated in relation to what is detected by the
instrument panel.
Use buttons (1) and (2) to scroll and select the desired
level. Press ENTER (3) to validate, then select "Back",
and press ENTER (3) again to exit.
Display setup Brightness
Back
100%
80%
6
6
6
6
60%
0%
0%
0%
0%
100%
N
Gear
Fig 129
217