Changing Riding Mode
Note
If the "Rally" screen is active, make sure that
the Trip master function is selected.
Press and hold the MODE/ENTER button (3) for
●
a long time.
The dedicated screen is displayed where, using
●
buttons (1) and (2), it is possible to scroll through
the available Riding Modes and display the
parameters with the relevant set values.
Press the MODE/ENTER button (3) to confirm.
●
Select "Exit" and press MODE/ENTER button (3) to
quit the screen without making any changes.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
If speed is lower than or equal to 5 km/h (3 mph)
●
and throttle control is open, the message "Close
throttle" is displayed; the new Riding Mode is
confirmed and stored only when throttle control
is closed and then the main screen is displayed.
If speed is lower than or equal to 5 km/h (3 mph),
●
throttle control is closed but brakes are
actuated, the message "Release brakes" is
S
S
S
SPORT
S
S
PO
PORT
PO
PO
PO
RT
RT
RT
RT
Exit
RALLY
ENDURO
W
W
W
W
WET
W
ET
ET
ET
ET
ET
Power
DWC
DTC
DQS
High
2
3
Off
0
km/h
1
ABS
EBC
2
1
1
N
Gear
Fig 65
3
115