Jdash1 : Tuning Controller Connector; Jcom1: Serial Port Connector; Jci1: Chassis Intrusion Connector - MSI B560M PRO WIFI User Manual

JDASH1 : Tuning Controller connector

This connector is used to connect an optional Tuning Controller module.
2
1

JCOM1: Serial Port Connector

This connector allows you to connect the optional serial port with bracket.
2
1

JCI1: Chassis Intrusion Connector

This connector allows you to connect the chassis intrusion switch cable.
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the
chassis.
2. Close the chassis cover.
3. Go to BIOS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.
18
Overview of Components
Downloaded from
1
6
3 MCU_SMB_SCL_M
5
5
1
10 3
5
9
7
9
Normal
(default)
ManualsNet.com
No Pin 2
4
VCC5 6
DCD 2
SOUT 4
Ground 6
RTS 8
RI 10
Trigger the chassis
intrusion event
search engine
NC
MCU_SMB_SDA_M
Ground
SIN
DTR
DSR
CTS
No Pin