Recording Schedule Setup; Setup Recording Schedule - Kodicom DigiNet Center User Manual

10.3 Schedule Setup
1
2
1
[Camera]
• Select camera number.
2 [Setting recording type]
This function is to set selected camera's recording type
by each day and time.
Select time of the day and select (drag) the area and
then select recording mode from [Record Mode].
If you need to set minutes too, double click on
corresponding time and you will see a picture that looks
just like below. Drag either to left or right.
01 min 59 min
3 [Simple/Advanced mode]
This function lets you to select by minutes instead of
hours depend on recording mode.
A pop up menu will appear if you click [Simple mode] on
the right hand side of corner. Time setup selection is
depend on mode type.
[Advanced mode] gives more option for time setup. You
can set different time for each day.
3
4
4
[Record mode]
• This function is to set recording type along with day and
time for selected camera.
• After choosing day and time from selected camera,
selecting more than 1 record mode will change selected
time setup within selected time.
• If you erase all the record type from [Record mode],
selected setup time will change to no record mode.
• Default is 'Motion & sensor record' of 24 hour
continuous record.
[Indication by record type]
• C: Continuous Record
• M: Motion Record
• S: Sensor Record
• P: Free Alarm Record
[Supported record mode]
• No record
• Continuous record
• Motion record
• Sensor record
• Motion & sensor record
• motion & free alarm record
• Sensor & free alarm record
• Motion & sensor & free alarm
record