Table of Contents
Advertisement
H O B WA R M I N G Z O N E
The warming function can be activated by turning the
control knob to the 'On' position.
A P P L I A N C E E R R O R S
Appliance Errors
Fault Description
ER03 and
Continuous button actuation;
permanent tone
control switches off after 10 seconds
E2
Over temperature
1. Pot/pan not suitable, example
Loss of magnetic properties
because of temperature at bottom
E3
of pot.
2. Power of cooking zones
permanently exceeded
E/H
Invariable resistor fault
Action
Clean the user interface.
Allow system to cool
1. This error is reset after 30 seconds; the
cooking zone can be used again. The pot/
pan must be removed if the fault keeps
reoccurring.
2. The power unit must be replaced if the error
continues to be displayed even when no pot/
pan is present on the cooking zone.
Induction module must be cool
19
Advertisement
Table of Contents
