1u 4k@60fps hdmi encoder with 4/8/12/16 inputs (13 pages)
Summary of Contents for TBS technologies TBS2614
Page 1
TBS2614/TBS2616 HDMI Video Encoder User Manual TBS2614 is 4-channel HDMI Encoder, it supports 2-channel 4k_30hz (3840x2160) encoding or 4-channel 1080p_60hz (1920x1080) encoding. For the output, each channel supports “main stream” & “sub stream”. This is helping to adjust different terminal devices.
Page 2
www.tbsdtv.com Web UI Preview Status Preview: input preview. Encoding: encode configuration and output protocol. Input: input resolution and frame rate. If show “no video” means Encoder does not detect input, then please check source device side is playing or not. And also, it might be the HDMI cable does not connect tightly. Get: statistic of signal interrupts.
Page 3
www.tbsdtv.com Encoder There’s trick to configure “frame rate” & “key Interval”. For instance, normally, if your input is 1920x1080p_60hz, it’s better to encode to 30/60 fps, the key interval to 30/60/120; And if your input is 720p_50hz, it’s better to encode to 25/50fps, and then key interval to 25/50/100. 3 / 7...
Page 4
www.tbsdtv.com Resolution custom: resolution customize If the resolution you want is not listed in the table, please manual type in the resolution (width, height). RTSP Stream name: /stream01, /mychannel, and ect. Transport layer: TCP or UDP. A/V: audio + video out; or video out, or audio out. RTSP Encryption: RTSP authorization UDP Multicast/Unicast RTMP push...
Page 5
www.tbsdtv.com Type 2: URL mode The syntax is: rtmp://username:password@server:port/appname/playpath For instance, Youtube rtmp://a.rtmp.youtube.com/live2/2za0-4pgx-c7ha-xxxx-xxxx{stream_key} Twitch: rtmp://live-dfw.twitch.tv/app/xxxxxxxxx{stream_key} Facebook: rtmps://live-api-s.facebook.com:443/rtmp/xxxxxxxx {stream_key} Wowza: rtmp://2012:Admin1998@media.xx-mediaserver.com:1935/8018/xxxxxx caller: the "agent" (this application) sends the connection request to the peer, which must be listener, and this way it initiates the connection. listener: the "agent"...
Page 6
www.tbsdtv.com Caller mode Encode as the “Caller”: Latency Normally, the latency is set to 3to 4 times of RTT (round-trip-time). Extensions Audio 6 / 7...
Page 7
12 hours Encoder reboots. If you set 28 hours, then every 28 hours Encoder reboots. And so on. Reset Encoder: configuration/web UI password/port reset Reboot Encoder Firmware Upgrade Upload “update.bin” first and then upload “upgrade.bin”, last is to reboot Encoder to activate. Any question about TBS2614/TBS2616, please contact with us: support@tbsdtv.com 7 / 7...