Table of Contents
Advertisement
Contents
1. Overview..............................................................................................2
1.1 Application.............................................................................................................2
1.2 Technical Specification..........................................................................................2,3
2. Settings...................................................................................................3
2.1 IP setting..................................................................................................3
2.2 Network Setting.......................................................................................4
2.3 HDMI Main Stream Setting.......................................................................4,5,6
2.4 HDMI Second Stream Setting....................................................................6,7
2.5 Audio Expand...........................................................................................7
2.5.1 Audio Setting....................................................................................................8
2.5.2 HDMI OSD Setting.................................................................................9
2.5.3 HDMI color Setting..........................................................................................10
2.5.4 CVBS OSD Setting.............................................................................................11
2.5.5 CVBS color Setting............................................................................................12
2.5.6 Image Setting.....................................................................................................13
2.6 System ......................................................................................................13
2.6.1 System settings.......................................................................................13,14
2.6.2 Change Password....................................................................................14
2.6.3 Upgrade settings.....................................................................................14,15,16,17
2.6.4 Version................................................................................................................17
2.7 RTMP protocol setting..........................................................................................18,19
3. Status.......................................................................................................19,20,21,22
1 / 22
User Guide-TBS2603
Advertisement
Table of Contents
Related Manuals for TBS technologies TBS2603
Summary of Contents for TBS technologies TBS2603
-
Page 1: Table Of Contents
User Guide-TBS2603 Contents 1. Overview………………………………………………………………………………..2 1.1 Application……………………………………………………………………………………………….2 1.2 Technical Specification………………………………………………………………………………2,3 2. Settings………………………………………………………………………………………3 2.1 IP setting....................3 2.2 Network Setting..................4 2.3 HDMI Main Stream Setting...............4,5,6 2.4 HDMI Second Stream Setting..............6,7 2.5 Audio Expand...................7 2.5.1 Audio Setting……………………………………………………………………………………….8 2.5.2 HDMI OSD Setting.................9 2.5.3 HDMI color Setting………………………………………………………………………………10 2.5.4 CVBS OSD Setting…………………………………………………………………………………11... -
Page 2: Overview
TBS2603 H.265/H.264 HD HDMI encoder is a professional high-definition video coding box, which equipped with 1 HDMI channel input and dual stream RJ45 output. TBS2603 supports MPEG-4 AVC/H.264/H.265 High Profile code format input and dual stream H.264/H.265 format, audio AAC format output. -
Page 3: Settings
System Ethernet/RJ45 1000 Base-T Ethernet interface Protocol HTTP, UDP, RTP, RTSP, RTMP, ONVIF(not yet) Control Interface General Spec Dimensions 115mm*75*25mm Weight 170g(NW), 560g(GW) Working 0~45℃ Temperature 2. Settings On WEB setting page, modifying IP address of the computer is needed. Default IP address of the HDMI HD encoder is 192.168.1.168 Reset &... -
Page 4: Network Setting
2.2 Network Setting Default IP address is 192.168.1.168. If you forget the IP address after changing it, please press the RST button for 10 seconds to restart it when the machine is powered up, then it will restore factory default settings. Notes: After network setting is done, you need to reboot the device to make it work. - Page 5 Notes: Above data can be adjusted based on your practical application. 5 / 22...
-
Page 6: Hdmi Second Stream Setting
2.4 HDMI Second Stream Setting HDMI second stream setting is similar with HDMI main encoding setting, but this HDMI Encoder does not have CVBS interface, so CVBS main and CVBS second steam setting are not needed. 6 / 22... -
Page 7: Audio Expand
Notes: Above data can be adjusted based on your practical application. Notes: Above configuration parameter is the same with main stream 2.5 Audio Expand You can modify "Audio Setting", "HDMI OSD Setting", "CVBS OSD Setting", "HDMI color", "CVBS color" and "Image Setting" under this section (this HDMI Encoder does not have CVBS interface, so CVBS color setting is not needed), but if you do not want to modify it, you can just keep the original data. -
Page 8: Audio Setting
2.5.1 Audio Setting 8 / 22... -
Page 9: Hdmi Osd Setting
2.5.2 HDMI OSD Setting 9 / 22... -
Page 10: Hdmi Color Setting
2.5.3 HDMI color Setting 10 / 22... -
Page 11: Cvbs Osd Setting
2.5.4 CVBS OSD Setting 11 / 22... -
Page 12: Cvbs Color Setting
2.5.5 CVBS color Setting 12 / 22... -
Page 13: Image Setting
2.5.6 Image Setting 2.6 System You can do "System settings", "Change Password", "Upgrade settings" and check "Version" information under this section. 2.6.1 System settings 13 / 22... -
Page 14: Change Password
2.6.2 Change Password 2.6.3 Upgrade settings This setting includes two steps-"upload" and "upgrade", you need to upload the updating file first, then proceed with upgrading. Step 1: Click button “Browse” to select the updating file in your computer. 14 / 22... - Page 15 After the file is selected successfully, you will see the file name shown in front of button “upload”, then please click “upload” to continue. And after the file is uploaded successfully, you will see a note mentioning successfully uploaded, then please click “OK” to continue. 15 / 22...
- Page 16 Step 2: After the file is uploaded, please click button "upgrade", and you will also see update status during the whole process. After upgrade is successful, you will see a note mentioning "The system successfully updated", then please click “OK”. 16 / 22...
-
Page 17: Version
2.6.4 Version You can check version information under this section. 17 / 22... -
Page 18: Rtmp Protocol Setting
2.7 RTMP protocol setting 2.7.1 H.264/H.265 level: baseline main/ high/ profile. If you want support RTMP, you should choose: baseline profile (H.265 only supports baseline profile). 2.7.2 RTMP protocol: enable and able can choose 2.7.3 RTMP server IP: Input your corresponding serve IP 2.7.4 RTMP App Name: user-defined 2.7.5 RTMP stream name: user-defined 2.7.6 Sever Testing... -
Page 19: Status
2.7.6.3 Go to folder "FlashPlayer", find "VideoPlayer.html" and open it 2.7.6.4 Input: rtmp://ip address/rtmp/hdmi, then choose "live" to see the images, or input rtmp://192.168.1.100:1935/live/hdmi to choose "LIVE", then click "Play stream" 3. Status After HDMI main stream setting and HDMI second stream setting are done, you will be able to see their access address, and you can directly copy it to the VLC player software for decoding. - Page 20 --Access Address: it can be directly copied to the VLC player software for decoding. --Video parameters: Video signal parameters that inputted in. 20 / 22...
- Page 21 --Audio parameters: Audio signal parameters that inputted in. --Hardware status: Increasing intervals indicates it has video input. If it displays as 0, it means there is no video input, then you need to check the input signal. 21 / 22...
- Page 22 If HDMI main stream or HDMI second stream is not set, then you will see"Access address: disabled" which shown as the picture below, then you have to go to reset them based on the user guides shown on "2.3 HDMI Main Stream Setting" and "2.4 HDMI Second Stream Setting".