How To Tell If X2 Is Enabled In Your I-Modem - US Robotics x2 Courier I-modem Manual

How to Tell if x2 is Enabled in Your I-modem

If you aren't sure whether x2 is enabled in your Courier I-modem, use the
ATI7 command to display product configuration information. If x2 is enabled
on your Courier I-modem, the following information displays:
USRobotics Courier I-modem Configuration Profile...
Copyright, 19xx-96, U.S. Robotics. All rights reserved.
Product type
Options
Fax Options
Clock Freq
Eprom
Ram
Supervisor date
DSP date
Supervisor rev
DSP rev
Serial Number
OK
Note: Dates, serial numbers, and revision numbers may vary. The most
important line is the "Options" line, which lists support for x2.
US/Canada External
HST,V32bis,Terbo,VFC,V34+,x2
Class 1,Class 2.0
20.16Mhz
256k
32k
01/16/97
01/16/97
7.0.0
2.0.0
{serial number}
Courier I -modem 3