Enhanced X2 Features; Other New I-Modem Features - US Robotics x2 Courier I-modem Manual

Enhanced x2 Features

Your Courier I-modem with x2 has new result codes and the following new
features:
To do this
Detemine if x2 is enabled in your I-modem
Disable or enable server and symmertic x2
Limit the upper speed limit of an x2 connection
Limit the lower speed limit of an x2 connection
Note: Your Courier I-modem reports the initial established connect speed of
33333 bps or 29333 bps. The I-modem then shifts to higher x2 connection rates
after monitoring the line conditions and establishing the maximum x2 connect
rate for that line. After waiting several seconds for the higher connection speed
to be established, view the ATI6 screen to determine what speeds the Courier
I-modem has shifted up to after the initial connect.

Other New I-modem Features

Your Courier I-modem also has the following new features:
•
Data Over Voice
•
Host Mode Multilink PPP
•
Dynamic Data Bandwidth Allocation
These new features, and how to use them, are explained in this addendum.
2
x2 Addendum
Use this command
ATI7
ATS58
AT&N
AT&U