Host Mode Multilink Ppp; Determining Turboppp Settings; Setting Multilink Ppp Host And Originate Mode - US Robotics x2 Courier I-modem Manual

Host Mode Multilink PPP

Your Courier I-modem now supports Host Mode Multilink PPP. Host Mode
Multilink PPP allows you to set the I-modem to accept Multilink PPP calls.

Determining TurboPPP Settings

To do this
Obtain an overview of TurboPPP settings

Setting Multilink PPP Host and Originate Mode

Use the following *P settings to control Multilink PPP:
To do this
Set all PPP-related default
values
Set Asynchronous to
Synchronous PPP
Set Single Link TurboPPP
Set Multilink PPP
Note: Before you can use this feature you must enable Host Mode Multilink
PPP using *V2=5.
Use this command
ATI16
Use this Or these settings
setting
*P=0 *V2=5, S68.2=0, S68.6=0,
S69.1=0, *D1 =2, *D2=24
*D3=85, *D4=60, *K=1
*P=1 S68.2=1
*P=2 S68.2=0, S68.3=1
*P=3 S68.2=0, S68.3=0
Courier I -modem 11