Troubleshooting X2 - US Robotics x2 Courier I-modem Manual

Troubleshooting x2

If x2 client modems cannot connect at x2 speeds to x2 server I-modems,
use the chart below to determine problems at the server end and how to fix
them:
Step This may be the problem
x2 may not be enabled on
1
your Courier. I-modem
There may be a problem with
2
the phone line or the other
modem.
There is another issue.
3
Do this
See the section "How to Tell if x2 is
Enabled" (Use the ATI7 command)
Refer the x2 client modem to x2
documentation.
Do the following:
•
Visit the U.S. Robotics x2 Web
Site at http://www.usr.com/x2
•
Contact U.S. Robotics Technical
Support at 800.550.7800
Courier I -modem 19