Removing Nose And Ear Hair; Cutting Eyebrows - Silvercrest SNOT 20 A1 Operation And Safety Notes

Removing nose and ear hair

Place the nose and ear hair trimmer attachment
the product as described in the chapter "Attaching /
removing the attachment". Switch the product on as de-
scribed in the chapter "Switch on / off".
CAUTION! DANGER OF INJURY! Be careful not
to insert the product too deep into nose or ears. Care-
fully insert only the tip of the blade
area of your nostril or ear. Remove the nose or ear hair
with small circular movements.
After using switch the product off as described in the
chapter "Switch on / off".

Cutting eyebrows

Place the eyebrow trimmer attachment
product as described in the chapter "Attaching /
removing the attachment".
Take off the protective cap
To achieve the desired length (3 mm / 6 mm), set the
dual comb attachment
desired length (see Fig. C). Marking of the length is
marked on the dual comb attachment
the dual comb attachment
tightly.
11
.
4
on the blade
8
fastens audibly and sits
8
onto
2
into the front
onto the
5
with the
12
. Ensure that
8
GB/IE/NI 17