Preparing The Product For Use; Inserting / Replacing The Battery; Removing Nose And Ear Hair; Cutting Eyebrows - Silvercrest 276646 Operation And Safety Notes Translation Of Original Operating Instructions

Preparing the product for use

Inserting / replacing the battery

To insert / replace the battery

Removing nose and ear hair

Note: Do not use the product if the blade
Take off the protective cap
ON / OFF switch
CAUTION! DANGER OF INJURY! Be careful not to insert the
device too deep into nose or ears. Carefully insert only the tip of the
blade into the front area of your nostril or ear. Remove the nose or ear
hair with small circular movements.
After using the trimmer, switch the device off by pushing the ON / OFF
switch downwards.

Cutting eyebrows

Select the long comb attachment
depending on the desired hair length ("Long"
length; "short"
9
. Switch the device on by pushing the
1
upwards.
3
: approx. 4 mm length).
7
, proceed as shown in Fig. B.
is deformed or damaged.
2
or the short comb attachment
6
6
: approx. 7 mm
GB/CY
7
11