Advertisement
install the USB-SERIAL driver.
**Set-Up
- If a Disc or SD Card is inserted, remove before operation.
- Use AC Adaptor
- Select [CARD RECORDING] mode.(Fig1)
- Don't connect DVD-CAM to PC using USB cable.
- Set the DVD-Camcorder to "COM" mode for service adjustment mode by
pushing [DELETE] and [RECORDING START/STOP]
buttons simultaneously while pushing [JOYSTICK CONTROL] upward
for more than 3 seconds.
Then, "COM" is displayed on LCD.
- Connect the PC and DVD-Camcorder as shown in Fig.2.
procedure
1. Turn the power of PC "ON".
2. Download the "TATSUJIN software" of the DVD-Camcorder from TSN-
web and install it into your PC.
Note: "****.exe"
(D300.exe : VDR-D250/258/300/308 series)
3. Execute the downloaded latest "****.exe" file by double clicking to start
up TATSUJIN adjustment software.
4. Then the main menu will be displayed as shown in Fig.3.
5. Select the desired model.(1)(Fig.3)
6. Then, click "Start".(2)(Fig.3)
[Fig.1]
[Fig.2]
[Fig.3]
2
Advertisement
