Advanced Security - TP-Link Archer C20 User Manual

Chapter 4
•
•
•
•
•
3. Click Save.
4. 8. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• DoS Protection
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
Downloaded from ManualsNet.com
FTP ALG - To allow FTP clients and servers to transfer data across NAT, keep
the default Enable.
TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep
the default Enable.
H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT,
keep the default Enable.
RTSP ALG - To allow some media player clients to communicate with some
streaming media servers across NAT, click Enable.
SIP ALG - To allow some multimedia clients to communicate across NAT, click
Enable.

Advanced Security

Security > Advanced
- Denial of Service protection. Select Enable or Disable to enable or
search engine
Security, and you can protect the router from being
System Tool > Statistics
-Check the box to enable or disable this function.
Configure the Router
is enabled.
41