Dell Latitude 7530 Service Manual page 86

Steps
1. For computers shipped with a carbon fiber palm-rest, align and place the microSIM filler in its slot on the palm-rest assembly.
NOTE: The microSIM filler must be transferred to the new replacement palm-rest assembly.
2. Place the palm-rest assembly on a flat surface and perform the post-requisites to install the palm-rest assembly.
Next steps
1. Install the keyboard.
2. Install the power button with optional fingerprint
3. Install the I/O daughter-board.
4. Install the system board.
5. Install the tweeter speakers, if applicable.
NOTE: This procedure applies only to computers shipped with a WLAN-antenna module installed in the display assembly.
6. Install the main-speakers.
7. Install the main-speakers
8. Install the audio daughter-board.
9. Install the display assembly.
10. Install the WLAN-antenna and tweeter-speakers
NOTE: This procedure applies only to computers shipped with a WLAN-antenna module installed on the palm-rest and
keyboard assembly.
11. Install the thermal module.
12. Install the 3-cell battery
13. Install the WWAN card, if applicable.
NOTE: This procedure applies only to computers shipped with a WWAN card installed.
14. Install the M.2 2230 solid-state drive
15. Install the base cover.
16. Install the microSIM-card
17. Follow the procedure in
86 Removing and installing components
daughter-board.
module, if applicable.
or the 4-cell battery, whichever applicable.
or the M.2 2280 solid-state
tray.
After working inside your
reader.
drive, whichever applicable.
computer.