Step 3: Connecting Tv; Using Av Out Jack; Using Y Pb Pr Out Jack - Philips MCD299/98 User Manual

Installation

Step 3: Connecting TV

IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
– Connect the DVD system directly to
the TV.

Using AV OUT jack

S-VIDEO
AUDIO IN TV IN
IN
VIDEO IN
R
SPEAKERS 6 Ω
L
Y/Pb/Pr OUT
A/V OUT
CONNECT TO SUB WOOFER
1
Connect the end of the supplied AV cord with
only one connector to the AV OUT jack of the
DVD system.
2
For the other end, connect the video output
connector (yellow) to the video input jack (or
labeled as A/ V In, CVBS, Composite or
Baseband) on the TV. To hear the sound of this
DVD system through your TV, connect the audio
connectors (white/ red) to the audio input jacks
on the TV.
12
pg001-pg020_MCD299-98-Eng-A

Using Y Pb Pr OUT jack

IMPORTANT!
– The progressive scan video quality is
only possible when using Y Pb Pr, and a
progressive scan TV is required.
S-VIDEO
IN
AUDIO
TV IN
IN
VIDEO IN
1
Use component video cables (red/blue/green) to
connect the COMPOENT VIDEO
OUTPUT (Pr/Cr Pb/Cb Y) jack to the
corresponding Component video input jacks (or
labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.
2
If you are using a Progressive Scan TV (TV must
indicate Progressive Scan or ProScan capability),
to activate TV Progressive Scan, please refer to
your TV user manual. For DVD system
Progressive Scan function, see "Preparations-
Setting up Progressive Scan feature".
Note:
– If your TV does not support Progressive Scan, you
will not be able to view the picture.
12
R
R
SPEAKERS 6 Ω
L
Y/Pb/Pr OUT
A/V OUT
CONNECT TO SUB WOOFER
2007.9.27, 13:04