Step 3: Connecting Tv; Using A/V Out Jack; Using S-Video In Jack; Using Component Video Jacks (Y Pb Pr) - Philips MCD289/98 User Manual

Step 3: Connecting TV

IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
– Connect the DVD system directly to
the TV.

Using A/V OUT jack

S-VIDEO IN
AUDIO IN TV IN
VIDEO IN
1
Connect the end of the supplied AV cord with
only one connector to the A/V OUT jack of
the DVD system.
2
For the other end, connect the video output
connector (yellow) to the video input jack (or
labeled as A/ V In, CVBS, Composite or Baseband)
on the TV. To hear the sound of this DVD system
through your TV, connect the audio connectors
(white/ red) to the audio input jacks on the TV.

Using S-Video In jack

S-VIDEO
IN
AUDIO TV IN
IN
VIDEO IN
R
1
Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video input
jack (or labeled as Y/C or S-VHS) on the TV set.

Using Component Video jacks (Y Pb Pr)

IMPORTANT!
– The progressive scan video quality is
only possible when using Y Pb Pr, and a
progressive scan TV is required.
COMPONENT
Red Blue Green
Yellow Red White
1
Use the supplied AV cord (red/white/yellow) to
connect the COMPOENT jack to the
corresponding Component video input jacks (or
labeled as Y Pb/Cb Pr/Cr or YUV) on the TV:
yellow connector to the red jack, red connector
to the blue jack, white connector to the green
jack.
2
If you are using a Progressive Scan TV (TV must
indicate Progressive Scan or ProScan capability),
to activate TV Progressive Scan, please refer to
your TV user manual. For DVD system
Progressive Scan function, see "Preparations-
Setting up Progressive Scan feature".
Note:
– If your TV does not support Progressive Scan, you
will not be able to view the picture.
Press SYSTEM MENU on the remote to exit the
system menu and then DISC and "1" to exit
progressive scan.
11