Timer
Timer setting
The system can switch on to DISC, USB or
TUNER mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock has been set correctly. See
"Preparations - Step 2: Setting the clock"
for details.
– Timer setting can be activated only in the
standby mode.
1
Press and hold TIMER/SLEEP on the remote
control to select timer mode.
➜
The last timer setting starts flashing.
➜
The selected source will be lighted.
2
Press SOURCE (DISC, USB or TUNER on
the remote) to select the desired source.
●
You can press DISC 1/2/3/4 to select the
specific disc you would like to play.
●
Before setting timer, make sure the music source
has been prepared.
DISC – Load the disc(s). To start from a specific
track, make a program (refer to "Disc
Operations - Program").
USB – Correctly inser t a USB mass storage
device.
TUNER – tune to the desired radio station.
3
Press à á repeatedly to set the hour for the
timer to start.
36
pg021-pg044_MCD299-98-Eng-B
4
Press í / ë repeatedly to set the minute for
the timer to start.
5
Press TIMER/SLEEP on the remote control to
store the start time.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press Ç on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
●
Press TIMER/SLEEP on the remote control.
➜
To activate the TIMER
●
Press TIMER/SLEEP on the remote control.
➜
36
will disappear from the display.
will appear on the display.
2007.9.27, 13:05