Connections; Power Supply And Remote Turn On - Hertz S8 DSP User Manual

5. CONNECTIONS

5.1

POWER SUPPLY AND REMOTE TURN ON

How to turn the S8 DSP on and off
The S8 DSP is on when the logo is lit green. It can be turned on/off using the following methods:
1.
By connecting the REMOTE IN terminal with a Remote Out signal coming from an after market audio source.
2. Through the Speaker IN (IN 1 - IN 2) input. The ART
the output (BTL) of an amplified source to the SPEAKER IN 1 - IN 2 input channel. This function can be enabled/
disabled using the S8 DSP software,
PWR/REM
YELLOW
BLACK
BLUE REM IN
BLUE/WHITE REM OUT
PINK IN SEL
MEM SEL 1
WHITE
WHITE MEM SEL 2
MEM GND
BLACK
*
not supplied
, (auto remote TURN-ON) function is activated by connecting
TM
.
(see section 8.2.7.2.1)
USER'S MANUAL /
FUSE
HOLDER
(1A)
from HEAD UNIT
to Amplifier
REMOTE IN
*
*
*
5
9