Table of Contents
Advertisement
EQ Fine Tuning parametric adjustment. It is possible to change
the parameters of each equalizer band clicking with the right
mouse button on the slider, after that "fine tuning" will appear
next to it, then click with the left button on the wording
to open the "EQ Fine Tuning" menu.
in this part of the screen the name of the output channel
being equalized is displayed.
in this drop-down menu, by selecting the frequency,
it is possible to change the band (s) of the equalizer on
which to intervene.
G (dB): by operating the "G" slider, it will be possible to make
adjustments to the gain of the selected band (Gmin +12dB ÷ Gmax -12dB).
Fo (Hz): By operating on the "Fo" slider, it will be possible to make adjustments
to the frequency of the selected band.
Q: By operating on the "Q" slider, it will be possible to make adjustments to the "Q"
quality factor of the selected band (Q: 1 ÷ 15 step min 0.1).
8
8.8
OUTPUT LEVEL
This section shows the settings relating to the output levels of the S8 DSP active channels on the screen.
By operating on one of the sliders belonging to the output channels, it will be possible to adjust the output level
(-30 ÷ 0 dB) for each channel.
This part of the screen shows the output level of each individual channel (-30 ÷ 0 dB), referring to the position of
the output channels slider.
By clicking on the "Mute" button it will be possible to mute the output channels referred to it.
By clicking on the "Mute" button again, the mute function will be deactivated.
By clicking on the "Solo" button it will be possible to mute the output channels excluding the activated one.
By manually clicking on the "Solo" button this function will be disabled.
By operating on the "Volume" slider, it will be possible to make adjustments to the overall system output level (-60 ÷ 0 dB).
By acting on the "Sub Volume" slider it will be possible to adjust the subwoofer output level (-15 ÷ 0 dB), if present
in the system.
This part of the screen indicates the general output level of the system (-60 ÷ 0 dB).
This part of the screen indicates the subwoofer output level (-15 ÷ 0 dB).
By clicking on the "Mute" button it will be possible to mute the general output.
58
8
USER'S MANUAL /
Advertisement
Table of Contents
