Table of Contents
Advertisement
8
Bluetooth PIN
It provides the ability to manage the PIN for the connection between
S8 DSP and the PC/MAC.
By selecting No on the Enabled drop-down menu, the 6-digit pin request
for the bluetooth connection is disabled.
By selecting Yes on the Enabled drop-down menu, the 6-digit pin
request for the bluetooth connection is enabled.
Pin replacement
To replace the PIN (000000 default), click on the first white box on the left
(the box turns green) then enter the numbers chosen for the PIN.
Remark: to make the change effective, you will need to finalize the setup on
the S8 DSP
(see section.8.1.5)
-
press Later to subsequently finalize the new setup (the software will keep the changes made in the
bluetooth menu in memory).
-
press Now to immediately finalize the new setup.
-
press Cancel to interrupt the operation and return to the main menu (the software will not store in the
memory if changes have been made in the bluetooth menu).
WARNING:
the Bluetooth PIN function is not available in OFF LINE mode.
9
Working Mode
Standard mode: simplified procedure with some constraints that facilitate the use of the software
•
Expert mode: there are no restrictions on the functions to use the software
•
- press Back to go back to the Settings menu.
- press Close to go back to the main window.
USER'S MANUAL /
(see section. 8.6.)
.
(see section.8.6)
8
.
51
Advertisement
Table of Contents
