Hydraulic System; Hitching; Maintenance And Repairs - DAL-BO MaxiDisc Manual

Hydraulic folding rubber-suspension
Hide thumbs Also See for MaxiDisc:
Table of Contents

Advertisement

Hydraulic System

• Never allow bystanders within the operating radius of the MaxiDisc when
• Before performing maintenance or repairs on the hydraulic system, lower
• Clean the hydraulic fittings thoroughly before connection. Ensure that the
• After making repairs to the hydraulic system, thoroughly bleed air out of
• Regularly check hydraulic hoses for defects such as cracks, bends, chafing
• Avoid spilling oil on the ground. In case of spills, collect the oil and dis-
• In case skin should come in contact with hydraulic oil or grease or in case
• Escaping hydraulic oil under high pressure can penetrate the skin and

Hitching

Maintenance and Repairs

• Before servicing or making adjustments to the machine, securely block or
• Tighten all nuts, bolts hydraulic fittings or any other fastened assemblies
Side 8
the hydraulic system is activated to avoid the danger of an individual be-
ing crushed or pinched between the equipment.
the implement to the ground, relieve pressure in the system, turn off the
engine and remove the ignition key.
pressure is relieved in the hydraulic system before connecting the hydrau-
lic hoses to the tractor's hydraulic services.
the system.
or leaks.
pose of it properly.
clothing should become stained with oil, remove the stained clothes im-
mediately and wash the affected skin areas thoroughly. Oil and grease are
harmful to the skin.
cause severe injury. If an accident occurs, see a doctor immediately.
• An individual is in danger of being crushed during the hitching process.
Never place yourself or anyone else between the tractor and the Maxi-
Disc, or between parts that must be attached or connected.
unfold the machine, engage the tractor and machine brakes, stop the en-
gine and remove the keys.
after a few hours' use. Check often to make sure that they remain thor-
oughly tightened. Inspect all pins, screws and bolts for wear or damage
and make sure that all are securely in place to avoid any possible damage
or breakdown of the machine.
MaxiDisc

Advertisement

Table of Contents
loading

Table of Contents