Hydraulic System
Disc hubs
Tighten the disc hubs once a year or as needed.
Lubricate all lubrication points at least once a year.
Inspect all hydraulic hoses for chafing or leaks. Check hoses for pinching.
To avoid rust, any projecting piston rods should be coated with oil or grease
if the MaxiDisc is to be parked for a long period of time. Remember to re-
move the oil or grease prior to operation.
1. Screw off the cap.
2. Remove the split cotter pin
from the nut.
3. Tighten the nut ¼ turn or un-
til there is no play in the hub.
MaxiDisc
Fig. 12
Side 21