Table of Contents
Advertisement
The safety alert symbol is used throughout this manual to identify important
safety warning messages concerning your safety, the safety of other users or
the functional safety of the implement. Observe all safety instructions and
make them readily accessible to all users of the equipment.
General
• The operator must be thoroughly familiar with all safety precautions and
• The safety signs on the MaxiDisc contain important instructions concern-
• Never allow anyone to ride on the implement during operation or trans-
• Never allow bystanders within the operating radius of the MaxiDisc when
• Ensure that wing section locks are engaged when the MaxiDisc is in a
• Before performing any adjustments, maintenance or repairs on the ma-
• Remember to secure the drawbar stand and the lift arms (if applicable)
• Operate the tractor and MaxiDisc only while seated in the driver's seat.
• Always drive according to conditions.
• Do not use the MaxiDisc unless all safety signs are installed. Replace de-
MaxiDisc
Safety
operations of this equipment prior to using.
ing your safety, the safety of those around you, and the correct operation
of the machinery.
port.
the implement is in operation. Operate the MaxiDisc only while seated in
the driver's seat of the tractor.
folded position. Secure control levers against unintentional operation.
chinery, always unfold the MaxiDisc and lower the implement to the
ground or secure in transport position, set the tractor brakes, turn off the
engine and remove the ignition key.
with lynch pins.
fective safety signs immediately.
Side 7
Advertisement
Table of Contents
