User-Specific Applications - Endress+Hauser FOUNDATION Fieldbus Micropilot FMR51 Brief Operating Instructions

Commissioning
6. Setup → Full calibration
 Distance between minimum level (0%) and maximum level (100%).
7. Setup → Level
 Currently measured level
8. Setup → Distance
 Distance between lower edge of flange or thread and medium surface.
9. Setup → Signal quality
 Displays the signal quality of the analyzed level echo.
10. Setup → Mapping → Confirm distance
 Compare the distance displayed with the actual value to start recording an
interference echo map.
11. Setup → Advanced setup → Level → Level unit
 Select the level unit: %, m, mm, ft, in (factory setting: %)
The reaction time of the device is preconfigured via the Tank type parameter. Advanced
configuration is possible in the Advanced setup submenu.
8.7

User-specific applications

To configure the parameters for user-specific applications, see:
BA01121F - Operating Instructions, FMR51/FMR52, FOUNDATION Fieldbus
Also, for the Expert submenu:
GP01017F - Description of device parameters, FMR5x, FOUNDATION Fieldbus
36
Micropilot FMR51, FMR52 FOUNDATION Fieldbus
Endress+Hauser