Dell XPS 13 Plus 9320 Service Manual page 20

NOTE: Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly before
replacing the screws.
4. Connect the battery cable to the system board.
5. Line up the battery-connector bracket over the battery connector on the system board.
6. Slide the hook at the end of the battery-connector bracket under the system board. Ensure the hook fits into the underside
of the system board.
7. Tighten the captive screw on the bracket to the system board and ensure stud on the system board fits into its opening on
the battery-connector bracket.
20 Removing and installing components