Table of Contents
Advertisement
Regulatory Compliance Mark (RCM).
This
product
regulatory requirements.
Do not dispose of electric tools
together
material. Electric tools and electronic
equipment that have reached the end
of
their
separately
environmentally compatible recycling
facility.
FUNCTIONAL DESCRIPTION
5
4
3
2
1
17
14
16
15
1. Memory button
2. Overload indicator
3.
Units button
4.
Power button
5.
Temperature protection
indicator
6. Target input value
7. Actual value
8. Units
9.
Inflation button
meets
applicable
with
household
life
must
be
collected
and
returned
6
UNITS
MEMORY
10
11
12
13
10.
Digital pressure
gauge
11. - / + buttons
12. Handle
13. Hose
14. Shrader chuck
15. Sports needle
16.
Inflator nozzle
17. Presta valve
Cat. No. ....................................................... M18 BI
Volts............................................................ 18V DC
Battery Type .................................................M18™
Charger Type................................................M18™
waste
Maximum Pressure......150 PSI, 10.3 BAR, 1030KPa
Output ..................................... 1.41 SCFM @ 0 PSI
Recommended Ambient
to
an
Operating Temperature .................... -17°C to 51°C
WARNING
7
8
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
is not in use.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
may be hazardous.
9
Setting the Units (BAR, PSI or KPA)
To select the desired unit of pressure, press the
Units button to scroll through the units (BAR, PSI or
KPA).
During extended use or constricted air flow, the tool
temperature may rise. If the Temperature Protection
Indicator
least 10 minutes before continuing. In extremely low
temperatures,
Indicator
CAUTION
use.
Warning Indicator
nections for blockages before continuing use.
Accessories/Hose Storage
on the back of the tool. The hose can be wrapped
around the storage area and secured in the hose
clamp.
WARNING
protection marked to comply with AS/NZS
1337.1.
When working in dusty situations, wear
appropriate respiratory protection or use a
suitable dust extraction solution.
Do not leave the tool unattended during operation.
Risk of Bursting.
manufacturer's instructions for the item.
4
SPECIFICATIONS
0.99 SCFM@ 45 PSI
ASSEMBLY
Recharge only with the charger
Always lock the trigger or remove
the battery pack
any time the tool
Only use
accessorie
reco
mmended
for thi
Temperature Protection
comes on, allow the tool to cool for at
the
Temperature
may come on if the battery is too cold.
Allow
tool
to cool
after
each
10
minutes of
Overload Warning
may come on. Check all con-
OPERATION
To reduce the risk of injury,
always
wear
-
s
s tool. Others
Protection
for 10 minutes
continuous
proper
eye
Advertisement
Table of Contents
