Checks, Inspections And Revisions; Checks; Inspections - KONG Italy X-TRIM 4 Manual

CHAPTER

7.1 CHECKS

Before and after every use, check the device and ensure that:
- it is appropriate for the use it was intended for,
- it has not been subjected to mechanical deformations and it neither has cracks nor shows
signs of wear,
- the textile parts do not have cuts, burns, chemical products residues, excessive hair, wear,
in particular check areas at contact with the metal components,
- markings, including labels, are readable.

7.2 INSPECTIONS

The device must be inspected at least once a year, starting from the date of first use, by
expert personnel trained and approved by KONG S.p.A. The date of the first use and the
outcome of the inspection must be recorded in the Inspections and Servicing Register,
regarding which an example is indicated in chapter 10.
7.3 SERVICING
The device must be serviced by KONG S.p.A., or by expert personnel trained and approved
by KONG S.p.A. if:
- any malfunctions are detected,
- the result of the pre and post use check or of the inspections is negative.
The outcome of the servicing must be recorded in the Inspections and Servicing Register,
regarding which an example is indicated in chapter 10.
The device subject of servicing has a one-year warranty from the date of servicing.
www.kong.it
7
Original version in Italian dated 10/01/2022
CHECKS
INSPECTIONS
AND SERVICING
855.12 X-TRIM 4
17