SchaubLorenz 60 cm Built-In Oven Manual page 9

60 cm Built-In Oven Installation and Mounting
Installation Under Counter
Installation In An Elevated Cabinet
Installation Requirements
60 kg.
Placing and Securing the Oven
uniformly.
Place of use for product must be located before starting installation.
Product mustn't be installed in places which are under the effect of
strong air flow.
Carry the product with minimum two people. Do not drag the product so
that floor isn't damaged.
Remove all transportation materials inside and outside the product.
Remove all materials and documents in the product.
Cabin must match the dimensions provided in Figure 2.
A clearance must be provided at the rear part of the cabin as indicated
in the figure so that necessary ventilation can be achieved.
After mounting, the clearance between lower and upper part of the
counter is indicated in Figure 5 with "A". It's for ventilation and shouldn't
be covered.
Cabin must match the dimensions provided in Figure 4.
The clearances with the dimensions indicated in the figure must be pro-
vided at the rear part of cabin, upper and lower sections so that necessary
ventilation can be achieved.
Product dimensions are provided in the Figure 3.
Furniture surfaces for mounting and mounting materials to be used
must have a minimum temperature resistance of 100 °C.
Mounting cabin must be secured and its floor must be plane for product
not to tilt over.
Cabin floor must have a minimum strength that would handle a load of
Place the oven into the cabin with two or more people.
Ensure that oven's frame and front edge of the furniture match
GB
9