SchaubLorenz 60 cm Built-In Oven Manual page 19

REPLACING OVEN LAMP
WARNING: To avoid electric shock, ensure that the appliance circuit is
CLEANING OVEN GLASS
open before changing the lamp. (having circuit open means power is off)
Figure 11
Figure 12
Lift by pressing on plastic latches on left and right side as shown in
Figure 13 and pulling the profile toward yourself as in Figure 14. Glass
is released after profile is removed as shown in Figure 15. Remove the
released glass by pulling toward yourself carefully. Outer glass is fixed
to oven door profile. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that pro-
file is seated properly in place.
Figure 13
GB
sure that appliance is cold.
of appliance into electrical socket and complete
19
First disconnect the power of appliance and en-
Remove the glass protection by turning as
indicated in the figure on the left side. If you
have difficulty in turning, then using plastic
gloves will help you in turning.
Then remove the lamp by turning, install the
new lamp with same specifications. Lamp
specifications must be as follows;
-220-240 V 50/60 Hz AC, -15 W, -Type E14
Reinstall glass protection, plug the power cable
replacement. Now you can use your oven.
Figure 14 Figure 15