SchaubLorenz 60 cm Built-In Oven Manual page 10

Electrical Connection
lation.
al electrical requirements.
the product to network until its mounting is completed.
Mounting
Supply cord mustn't be under the oven, squeeze in between oven and
furniture or bend.
Fix the oven to the furniture by using the screws provided with the
product. Screws must be mounted as shown in Figure 5 by passing them
through plastics attached to frame of the product. Screws mustn't be
overtightened. Otherwise, screw sockets might be worn.
Check that oven doesn't move after mounting. If oven isn't mounted in
accordance with instructions, there is a risk of tilt over during operation.
Mounting place of the product must have appropriate electrical instal-
Network voltage must be compatible with the values provided on type
label of product.
Product connection must be made in accordance with local and nation-
Before starting the mounting disconnect network power. Do not connect
GB
10
Figure 2