5
Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
Check that you:
•
Make the necessary connections and
complete the setup as described in the
Quick Start.
•
Switch the TV to the correct source for the
home theater.
Access the home menu
The home menu gives you easy access to
connected devices, audio and video settings, and
other features.
1
Press
(Home).
» The home menu appears.
2
Press the Navigation buttons and OK to
select the following:
•
[play Disc] : Starts disc play.
•
[browse USB] : Accesses the content
browser of the connected USB storage
device.
•
[Setup] : Accesses menus to change
picture, sound and other settings.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
1
Press
(Sound options).
2
Press the Navigation buttons (left/right) to
access the sound options.
EN
10
Sound
Description
experience
SOUND
Selects a sound mode.
SURROUND
Selects a surround sound or
stereo sound.
TREBLE
Adjusts the high frequency
output.
MID
Adjusts the middle frequency
output.
BASS
Adjusts the low frequency
output.
AUDIO SYNC Delays the audio to match the
video.
3
Select an option, then press OK.
4
Press
(Back) to exit.
If you do not press a button within five seconds,
it automatically exits the menu.
Change sound mode
Select predefined sound modes to suit your
video or music.
1
Press
(Sound options).
2
Select SOUND, then press OK.
3
Press the Navigation buttons (up/down) to
select the following settings:
•
ACTION/ROCK : Enhanced low and
high-range. Ideal for action movies and
rock or pop music.
•
DRAMA/JAZZ : Clear mid and high-
range. Ideal for drama movies and jazz
music.
•
CONCERT/CLASSIC: Neutral sound.
Ideal for live concerts and classical
music.
•
SPORTS : Moderate mid-range and
surround effects for clear vocals and
the atmosphere of a live sport venue.
4
Press OK to confirm your choice.
Change surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
(Sound options).
Press
2
Select SURROUND, then press OK.