Connect to the internet
Connect the home theater to the internet
network and enjoy:
•
BD-Live applications : access to some
exclusive services from the BD-Live enabled
Blu-ray discs (see 'Access BD-Live on Blu-
ray' on page 12).
•
Software update : update the software of
the home theater through the network (see
'Update software from the network' on
page 18).
What you need:
•
A network router (with DHCP enabled).
•
A network cable (RJ45 straight cable).
•
For BD-Live application and software
update, make sure that the network router
has access to the Internet and the firewall is
disabled.
(Cable not supplied)
LAN
Set up network
1
2
3
4
5
6
7
8
9
•
Familiarize yourself with the network router,
media server software and networking
principles before attempting to connect the
home theater to a computer network. If
necessary, read documentation accompanying
network components. Philips is not responsible
for lost, damaged or corrupt data.
www
Connect the home theater to a broadband
modem or router (see 'Connect to the
internet' on page 9).
Turn on your TV and switch to the correct
source for the home theater.
Press
(Home).
Select [Setup], then press OK.
Select [Network] > [Network Installation],
then press OK.
Select [Wired (Ethernet)], then press OK.
Select [Auto (recommended)] or [Manual
(advanced)], then press OK.
Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry],
then press OK.
Select [Finish], then press OK to exit.
Caution
EN
9