Change Preference Settings; Change Advanced Settings - Philips HTS3260/12 User Manual

• [Audio Input Mapping] : Updates audio
input mapping if there are new devices
connected.
5
Press OK to confirm your choice.
Note
•
The connected devices must be connected
through HDMI and switched on.

Change preference settings

1
Press (Home).
2
Select [Setup], then press OK.
3
Select [Preference], then press OK.
4
Select and adjust the following settings:
•
[Menu language] : Selects the on-
screen display menu language.
•
[Audio] : Selects audio language for video.
•
[Subtitle] : Selects subtitle language for
video.
•
[Disc Menu] : Selects menu language
for video disc.
•
[Parental Control] : Restricts access to
discs that are recorded with ratings. To
play all discs irrespective of the rating,
select level '8'.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Auto Subtitle Shift] : Enables or
disables shift subtitle. If enabled,
it adjusts the subtitle position
automatically to fit the TV screen.
•
[Change Password] : Sets or changes
a PIN code to play a restricted disc.
Enter '0000' if you do not have a PIN
or if you have forgotten your PIN.
• [Display Panel] : Changes the
brightness of the display panel.
• [Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
• [VCD PBC] : Displays or skips the
content menu for VCD and SVCD
discs.
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specific time.
5
Press OK to confirm your choice.
Note
•
If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
•
If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.

Change advanced settings

1
Press (Home).
2
Select [Setup], then press OK.
3
Select [Advanced], then press OK.
4
Select and adjust the following settings:
•
[BD-Live Security] : Restricts or allows
access to BD-Live.
•
[Enhanced Audio] : Enables or disables
the audio post processing at the
speaker output.
•
[Software Update] : Selects to update
software from the network or from
USB storage device.
• [Clear memory] : Clears local memory,
delete the BD-Live files that you previously
downloaded. If using an USB storage
device, the local storage folder is 'BUDA'.
•
[DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
• [Version Info.] : Displays the software
version for the home theater.
• [Restore default settings] : Resets the
home theater to the default settings
programmed at the factory.
5
Press OK to confirm your choice.
Note
•
You cannot restrict internet access on
commercial Blu-ray discs.
•
Before you purchase DivX videos and play them
on the home theater, register the home theater
on www.divx.com using the DivX VOD code.
•
You cannot reset parental control setting to its
default value.
EN
17