Advertisement
affect the normal discharge of air conditioning condensate, seriously, will lead to air
conditioning leakage into the car.So before installation, try to use rubber and plastic sponge
board to stick it flat, and then measure the height between the front and rear position of the air
conditioning bottom plate and the car roof, to maintain the same size.
4. Install the outdoor unit
Install the outdoor unit directly on the opening of 355x355 , as shown.The black EVR
sealing frame at the bottom of the air conditioner is placed on the opening hole. Inside the
compartment, the four M8 mounting holes at the bottom of the air conditioner are evenly
symmetrical in front and rear.Seal with sealant for waterproof treatment, especially at the
connection , to ensure that the roof does not leak down.
Sealing frame
7
Advertisement
