Advertisement
Ⅱ. Preparations before the installation
1. Determine the installation position of the air conditioning
The air conditioning unit shall be installed on the top of the car, the
is inhaled from bottom to up, and the outlet air is discharged into the vehicle from top-down.
2. Heat insulation treatment of the car body
The top of the body, skirt, air pipe, air scoop etc. should be heat insulation .The technical
requirements shall meet the relevant requirements of the JT / T216-95 thermal insulation
performance test of the Ministry of Communications.
Inspection item:
①.The thickness of insulation layer around of the body ,roof and engine is more than
30mm;
②.The connection of body, roof and air duct frame shall be insulated to avoid the loss
of cold due to cold bridge;
③.The doors and windows are sealed well;
④.All components should be installed as far away from the heat source as possible,
and take into the account the convenience of maintenance.
Ⅲ. Product features
The air conditioning is mainly suitable for RV, lifting equipment, small ships, mobile
communication vehicles, medical service vehicles, mobile police cars, special purpose van and
so on.
1. Streamlined appearance design, effectively reduce the wind resistance, compact structure,
beautiful, small volume.
2. Large cold volume and air supply volume, to meet the greater space requirements.
3. Air conditioning operation is simple, with an advanced computer board and remote control
design, can facilitate the precise control of air conditioning.
4. Low noise, lower than similar products, and long service life.
5. Using the new environmentally friendly refrigerant R 134a, no pollution and no damage to
the environment.
6. Use AC220V or AC110V AC or DC12V DC,good economy.
3
return air of the unit
Advertisement
