Related Manuals for Kingtec KTD-2
Summary of Contents for Kingtec KTD-2
- Page 4 1.Press “power switch” for short time, panel power on., long press “power switch”, panel power off. 1. 16 Power switch: Press this key to boot, long press 3 seconds to shut down; In the shutdown state, press 2.Press “Wind speed+” to increase the air volume; Press “Wind speed-” to reduce the air volume; and hold for 10 seconds to restore all settings to the factory settings, and switch between Fahrenheit and 3.Press “Temperature+”...
- Page 5 1.Air supply mode: The wind speed is adjustable from 1 to 5 speed, and the temperature is not adjustable. 2.Strong mode: press the strong icon of the remote control, the wind speed is fixed at 5 speed, and the setting is 62.6 ℉.
- Page 7 blue...