Advertisement
Ⅵ. Unit installation instructions
1. Car roof strength
The weight of air conditioner is bout 45KG.Before installation, confirm whether the
strength of the installation position can carry the unit, so as not to cause personnel injury and
equipment damage.
2. Open the hole
As much as possible to Install the unit in the middle and front of the roof to ensure that the
outdoor exhaust of the unit is not affected.Open a vent with the size of 355x355mm
strictly follow this size) and avoid wires, lines and other components before cutting.If
necessary, it should be reinforced and sealed around the opening to prevent water leakage
and hot air from entering the carriage.
3. Installation Angle requirements
Standard installation is required to be mounted on the same level.If some roof is tilted,
the tilt of the installation of air conditioning can not be greater than 2 degrees, otherwise it will
6
(please
Advertisement
