Energy Saving; Apply Factory Settings - Philips HTS4561/12 User Manual

Ratings
Some discs are recorded with ratings according
to age. You can set up your home theater to play
only discs with an age rating lower than your
child's age.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference] > [Parental Control],
and then press OK.
» A message prompts you to enter the
password.
4
Enter the password with the Numeric
buttons.
5
Select an age rating, and then press OK.
•
To play all discs irrespective of the
rating, select level 8 or [Off].

Energy saving

Save energy by changing the following settings.
Auto standby
When playing a disc or a USB storage device,
automatically switch your home theater to
standby if:
•
it is in pause or stop mode, and
•
no button is pressed for 30 minutes.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference] > [Auto Standby] >
[On], and then press OK.
Sleep timer
Set timers to switch the home theater to
standby after a specified time.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference] > [Sleep Timer], and
then press OK.
4
Select the duration of the sleep timer.
» The sleep timer can be set up to 60
minutes. If the sleep timer is set to [Off],
it switches off.
5
Press OK to activate.
» The home theater switches to standby
after the specified time.
Screen saver
Automatically switch your home theater to
screen saver mode if:
•
it is in pause or stop mode, and
•
no button is pressed for 10 minutes.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference] > [Screen Saver] >
[On], and then press OK.
Display panel
Change the brightness of the home theater
display panel.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference] > [Display Panel], and
then press OK.
4
Select the brightness, and then press OK.

Apply factory settings

Reset your home theater to the default settings.
You cannot reset the parental control settings.
1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK.
EN
37